Revisión de la literatura sobre la flexibilidad de decisión operacional.

Julien Maheut

Abstract

En este artículo se presenta una revisión de la literatura sobre la flexibilidad en la toma de decisiones operacionales en el contexto de planificación y gestión en las cadenas de suministro. Esta revisión reflexiona sobre algunas de las definiciones propuestas en la literatura sobre la flexibilidad en la planificación estratégica. Se propone una caracterización de los diferentes tipos de flexibilidad presentes en la literatura en función de las diferentes tareas de planificación existentes y de las diferentes consideraciones en el uso de los materiales.

Keywords

Flexibilidad; Cadena de Suministro; Planificación de las Operaciones; Estado del arte

Full Text:

PDF

References

Aissaoui, N.; Haouari, M.; Hassini, E. (2007). Supplier Selection and order lot sizing modeling: a review. Computers & Operations Research, Vol. 34, nº. 12, pp. 3516-3540.

Akkerman, R.; van Donk, D. P. (2009). Product mix variability with correlated demand in two-stage food manufacturing with intermediate storage. International Journal of Production Economics, Vol. 121, nº. 2, pp. 313-322.

Arunapuram, S.; Mathur, K.; Solow, D. (2003). Vehicle Routing and Scheduling with Full Truckloads. Transportation Science, Vol. 37, nº. 2, pp. 170-182.

Balakrishnan, A.; Geunes, J. (2000). Requirements Planning with Substitutions: Exploiting Bill-of-Materials Flexibility in Production Planning. Manufacturing Service Operations Management, Vol. 2, nº. 2, pp. 166-185.

Bilgen, B.; Günther, H. O. (2009). Integrated production and distribution planning in the fast moving consumer goods industry: a block planning application. OR Spectrum.

Calderon-Lama, J. L.; Garcia-Sabater, J. P.; Lario, F. C. (2009). Modelo para la planificación de Operaciones en Cadenas de Suministro de Productos de Innovación. DYNA Ingeniería e Industria, Vol. 84, nº. 6, pp. 517-526.

Caner TaskIn, Z.; Tamer Ünal, A. (2009). Tactical level planning in float glass manufacturing with co-production, random yields and substitutable products. European Journal of Operational Research, Vol. 199, nº. 1, pp. 252-261.

Carrillo, J. E.; Franza, R. M. (2006). Investing in product development and production capabilities: The crucial linkage between time-to-market and ramp-up time. European Journal of Operational Research, Vol. 171, nº. 2, pp. 536-556.

Carvalho, J. D. A.; Moreira, N. A.; Pires, L. C. M. (2005). Autonomous Production Systems in virtual enterprises. International Journal of Computer Integrated Manufacturing, Vol. 18, nº. 5, pp. 357-366.

Clement, J.; Coldrick, A.; Sari, J. (1995). Manufacturing data structures: building foundations for excellence with bills of materials and process information. Wiley.

Crama, Y., Pochet, Y., & Wera, R. (2001). Production planning aproaches in the process industry. UCL, Belgium.

David, F.; Pierreval, H.; Caux, C. (2006). Advanced planning and scheduling systems in aluminium conversion industry. International Journal of Computer Integrated Manufacturing, Vol. 19, nº. 7, pp. 705-715.

de Kok, T. G.; Fransoo, J. C. (2003). Planning Supply Chain Operations: Definition and Comparison of Planning Concepts, en S. C. Graves (dir), Handbooks in Operations Research and Management Science Supply Chain Management: Design, Coordination and Operation, pp. 597-675. Elsevier.

Deuermeyer, B. L.; Pierskalla, W. P. (1978). A by-product production system with an alternative. Management Science, Vol. 24, nº. 13, pp. 1373-1383.

Escudero, L. F. (1994). CMIT, capacitated multi-level implosion tool. European Journal of Operational Research, Vol. 76, nº. 3, pp. 511-528.

Garcia-Sabater, J. P., Maheut, J., & Garcia-Sabater, J. J. (2009a). A Capacited Material Requierements Planning Model considering Delivery Constraints, in 3rd International Conference on Industrial Engineering and Industrial Management, pp. 793-803.

Garcia-Sabater, J. P., Maheut, J., & Garcia-Sabater, J. J. (2009b). A Capacited Material Requierements Planning Model considering Delivery Constraints: A Case Study from the Automotive Industry, in 39th International Conference on Computers & Industrial Engineering, pp. 378-383.

Geunes, J. (2003). Solving large-scale requirements planning problems with component substitution options. Computers & Industrial Engineering, Vol. 44, nº. 3, pp. 475-491.

Gronalt, M.; Hartl, R. F.; Reimann, M. (2003). New savings based algorithms for time constrained pickup and delivery of full truckloads. European Journal of Operational Research, Vol. 151, nº. 3, pp. 520-535.

Gupta, S. M.; Taleb, K. N. (1994). Scheduling Diassembly. International Journal of Production Research, Vol. 32, nº. 8, pp. 1857-1866.

Hachicha, W.; Masmoudi, F.; Haddar, M. (2008). A

Taguchi method application for the part routing selection in generalised group technology. International Journal of Materials and Structural Integrity, Vol. 2, nº. 4, pp. 396-406.

Hachicha, W.; Masmoudi, F.; Haddar, M. (2009). Design of experiments and analysis of correlations for the resolution of the problem of cell formation with alternative lines. Mecanique et Industries, Vol. 10, nº. 5, pp. 337-350.

Inderfurth, K.; Langella, I. (2006). Heuristics for solving disassemble-to-order problems with stochastic yields. OR Spectrum, Vol. 28, nº. 1, pp. 73-99.

Lang, J.; Domschke, W. (2010). Efficient reformulations for dynamic lot-sizing problems with product substitution. OR Spectrum, Vol. 32, nº. 2, pp. 263-291.

Lin, J. T.; Chen, T. L.; Lin, Y. T. (2009). Critical material planning for TFT-LCD production industry. International Journal of Production Economics, Vol. 122, nº. 2, pp. 639-655.

Lyon, P.; Milne, R. J.; Orzell, R.; Rice, R. (2001). Matching Assets with Demand in Supply-Chain Management at IBM Microelectronics. Interfaces, Vol. 31, nº. 1, pp. 108-124.

Matta, A.; Tomasella, M.; Valente, A. (2007). Impact of ramp-up on the optimal capacity-related reconfiguration policy. International Journal of Flexible Manufacturing Systems, Vol. 19, nº. 3, pp. 173-194.

Nilsson, C. H.; Nordahl, H. (1995). Making manufacturing flexibility operational-part 1: a framework. Integrated Manufacturing Systems, Vol. 6, nº. 1, pp. 5-11.

Öner, S.; Bilgiç, T. (2008). Economic lot scheduling with uncontrolled co-production. European Journal of Operational Research, Vol. 188, nº. 3, pp. 793-810.

Pantelides, C. C. (1994). Unified Frameworks for the Optimal Process Planning and Scheduling, in 2nd Conference on the Foundations of Computer Aided Operations, Cache Publications, pp. 253-274.

Persona, A.; Battini, D.; Manzini, R.; Pareschi, A. (2007). Optimal safety stock levels of subassemblies and manufacturing components. International Journal of Production Economics, Vol. 110, nº. 1-2, pp. 147-159.

Pires, L. C. M.; Carvalho, J. D. A.; Moreira, N. A. (2008). The role of Bill of Materials and Movements (BOMM) in the virtual enterprises environment. International Journal of Production Research, Vol. 46, nº. 4, pp. 1163-1185.

Puig-Bernabeu, X., Maheut, J., Garcia-Sabater, J. P., & Lario, F. C. (2010). Algorithm for planning the supply of products with FTL strategy in a lean environment: an industrial case, in ICOVACs 2010 - International Conference on Value Chain Sustainability, pp. 174-182.

Ram, B.; Naghshineh-Pour, M. R.; Xuefeng, Y. (2006). Material requirements planning with flexible bills-of-material. International Journal of Production Research, Vol. 44, nº. 2, pp. 399-415.

Sabri, E. H.; Beamon, B. M. (2000). A multi-objective approach to simultaneous strategic and operational planning in supply chain design. Omega, Vol. 28, nº. 5, pp. 581-598.

Schutz, P.; Tomasgard, A.; Ahmed, S. (2009). Supply chain design under uncertainty using sample average approximation and dual decomposition. European Journal of Operational Research, Vol. 199, nº. 2, pp. 409-419.

Segerstedt, A. (1996). A capacity-constrained multi-level inventory and production control problem. International Journal of Production Economics, Vol. 45, nº. 1-3, pp. 449-461.

Soman, C. A.; van Donk, D. P.; Gaalman, G. J. C. (2007). Capacitated planning and scheduling for combined make-to-order and make-to-stock production in the food industry: An illustrative case study. International Journal of Production Economics, Vol. 108, nº. 1-2, pp. 191-199.

Sousa, R.; Shah, N.; Papageorgiou, L. G. (2008). Supply chain design and multilevel planning--An industrial case. Computers & Chemical Engineering, Vol. 32, nº. 11, pp. 2643-2663.

Spengler, T.; Püchert, H.; Penkuhn, T.; Rentz, O. (1997). Environmental integrated production and recycling management. European Journal of Operational Research, Vol. 97, nº. 2, pp. 308-326.

Stadtler, H. (2005). Supply chain management and advanced planning--basics, overview and challenges. European Journal of Operational Research, Vol. 163, nº. 3, pp. 575-588.

Stadtler, H.; Kilger, C. (2002). Supply Chain Management and Advanced Planning: Concepts, Models, Software and Case Studies. springer.

Tagaras, G. (1999). Pooling in multi-location periodic inventory distribution systems. Omega, Vol. 27, pp. 39-59.

Vidal-Carreras, P.; Garcia-Sabater, J. P. (2009). Comparison of heuristics for an economic lot scheduling problem with deliberated coproduction. Journal of Marketing Research, Vol. 2, nº. 3, pp. 437-463.

Weidema, B. P. (1999). System expansions to handle co-products of renewable materials, pp. 45-48.

Wilson, S.; Platts, K. (2010). How do companies achieve mix flexibility? International Journal of Operations & Production Management, Vol. 30, nº. 9, pp. 978-1003.

Abstract Views

1538
Metrics Loading ...

Metrics powered by PLOS ALM

Refbacks

  • There are currently no refbacks.




This journal is licensed under a Creative Commons Attribution 4.0 International License.

Universitat Politècnica de València

e-ISSN: 1989-9068   https://doi.org/10.4995/wpom