Extensión del Estándar ISO 10303 AP-238 para la Automatización del Acceso a Datos de Procesos CNC

Autores/as

  • J. Garrido Universidad de Vigo
  • R. Marín Universidad de Vigo
  • J. Ignacio Universidad de Vigo
  • J. Sáez Universidad de Vigo

Palabras clave:

Automatización, CAD/CAM, CNC, Estándares, ISO, monitorizar, adquisición de datos

Resumen

El nuevo estándar ISO 10303-AP238 (STEP-NC) abre nuevas posibilidades para la comunicación de datos entre sistemas CAD/CAM y sistemas de fabricación CNC. Este artículo propone una extensión del modelo de información STEP-NC con nuevas estructuras de datos y nuevas funciones NC para contemplar capacidades de acceso a información en tiempo real del proceso de mecanizado, y apoyar a otras actividades avanzadas como la trazabilidad o la realización de los llamados procesos de mecanizado closed loop.

Descargas

Los datos de descargas todavía no están disponibles.

Citas

Albert M. (2000). STEP NC - The end of G-codes?. Modern Machine Shop, pp. 70-80.

Brecher C., Vitr M. and Wolf J. (2006). Closed-loop CAPP/CAM/CNC process chain based on STEP and STEPNC inspection tasks. International Journal of Computer Integrated Manufacturing, 19(6), 570-581.

Chen L., Song Z. and Feng L. (2003). Internet-enabled real-time collaborative assembly modelling via an e-Assembly system: status and promise. Computer-Aided Design, 36, pp. 835-47.

Eastec (2005). Eastec demo walkthrough. On-line, accedido en Febrero 2007: http://www.isd.mel.nist.gov/projects/stepnc.

Fichtner D., Nester A., Dang N., Scgulze A., Carlsen U., Schreiber S. and Klemm P. (2006). Use of agents and neural networks for acquisition and preparation of distributed NC information to support NC planning. International Journal of Computer Integrated Manufacturing, 19(6), pp. 581-92.

Garrido J. and Hardwick M. (2006). A traceability information model for CNC manufacturing. Computer-Aided Design, 38, pp. 540-551.

Hardwick M. and Loffredo D. (2001). STEP into NC. Manufacturing Engineering, 126, pp. 38-50.

Hardwick M. (2004). On STEP-NC and the complexities of product data integration. ACM/ASME Transactions on Computer and Information in Science Engineering, 4, pp. 60-67.

Hardwick M. and Loffredo D. (2006). Lessons learned implementing STEP-NC AP-238. International Journal of Computer Integrated Manufacturing, 19(6), pp. 523-533.

IMS (2001). IMS project 97006 (STEP-NC). STEP_NC STEPcompliant data Interface for numerical controls. On-line, accedido en Febrero 2007: http://www.ims.org/projects/project_info/step_nc.html.

ISO (1982). Numerical control of machines - program format and definition of address words – Part 1: Data format for positioning, line motion and contouring control systems, ISO TC 184/SC 1, Geneva, Switzerland.

ISO (1994a). ISO 10303-1:1994. Industrial automation systems and integration - Product data representation and exchange – Part 1: overview and fundamentals principles. ISO TC 184/SC 4, Geneva, Switzerland.

ISO (1994b). ISO 10303-11:1994. Industrial automation systems and integration - Product data representation and exchange – Part 11: description methods: the EXPRESS language reference manual. ISO TC 184/SC 4, Geneva, Switzerland.

ISO (2002a). ISO 10303-21:2002. Industrial automation systems and integration - Product data representation and exchange – Part 21: implementation methods: clear text encoding for the exchange structure. ISO TC 184/SC 4, Geneva, Switzerland.

ISO (2002b). ISO 10303-238:2002. Industrial automation systems and integration - Product data representation and exchange – Part 238: application protocol: application interpreted model for computerized numerical controllers. ISO TC 184/SC 4, Geneva, Switzerland.

ISO (2003). ISO 14649-1. Industrial automation systems and integration – Physical device control – Data model for computerized numerical controllers - Part 1: Overview and fundamental principles, Geneva, Switzerland: International Organisation for Standardisation.

ISO (2004). ISO 14649-11. Industrial automation systems and integration – Physical device control – Data model for computerized numerical controllers - Part 11: Process data for milling, Geneva, Switzerland: International Organisation for Standardisation.

ISO (2005). ISO 14649-12. Industrial automation systems and integration – Physical device control – Data model for computerized numerical controllers - Part 12: Process data for turning, Geneva, Switzerland: International Organisation for Standardisation.

Jansen-Vullers, M.H., Dorp, C.A. and Beulens, A.J.M. (2003) Managing traceability information in manufacture, International Journal of Information Management, 23(5), pp. 395-413.

Li W.D., Lu W.F., Fuh J.Y.H. and Wong Y.S. (2005). Collaborative computer-aided design - research and development status. Computer-Aided Design, 37(9), pp. 931-40.

Newman, S.T., Nassehi, A., Xu, X.W., Rosso, R.S.U., Wang, L., Yusof, Y., Ali, L., Liu, R., Zheng, L.Y., Kumar, S., Vichare, P. and Dhokia, V., (2008). Strategic advantages of interoperability for global manufacturing using CNC technology, Robotics and Computer-Integrated Manufacturing, 24, pp. 699 – 708.

OMAC (2005). STEP-NC pilot demostration. OMAC STEP-NC working group meeting. On-line, accedido en Febrero 2007: www.isd.mel.nist.gov/projects/stepnc/omac-orlando2005/pilot-scenario.pdf.

Open CASCADE, (2004). Technical overview 4/2002. On-line, accedido en Julio 2007: www.opencascade.org.

Simchi-Levi D., Kaminsky P. and Simchi-Levi E. (2003). Designing and management the supply chain, Editorial: McGraw-Hill, Irwin, New York, NY.

STEP Tools (2006). ST-Developer on line manuals. On-line, accedido en Febrero 2007: http://www.steptools.com/Support/stdev_docs/.

Suh S.H., Cho J.H. and Hong H.D. (2002). On the architecture of intelligent STEP-compliant CNC. International Journal of Computer Integrated Manufacturing, 15(6), pp. 168-177.

Weck M., Wolf J. and Kristis D. (2001). STEP-NC: the STEP compliant NC programming interface: evaluation and improvement of the modern interface. International IMS Forum. Ascona, Switzerland.

Wosnik M., Kramer C., Selig A. and Klemm P. (2006). STEPNC for integrated and Distributed Manufacturing Processes: Enabling feedback of process data by use of STEP-NC. International Journal of Computer Integrated Manufacturing, 19(6), pp. 559-570.

Xu X.W. and He Q. (2004). Striving for a total integration of CAD, CAPP, CAM and CNC. Robotics and ComputerIntegrated Manufacturing, 20(2), pp. 101-109.

Xu X.W. (2006). Realization of STEP-NC enabled machining. Robotics and Computer-Integrated Manufacturing, 22(2), pp. 144-153.

Zhang C., Liu R. and Hu T. (2006). On the futuristic machine control in a STEP-compliant manufacturing scenario. International Journal of Computer Integrated Manufacturing, 19(6), pp. 508-516.

Descargas

Publicado

09-01-2009

Cómo citar

Garrido, J., Marín, R., Ignacio, J. y Sáez, J. (2009) «Extensión del Estándar ISO 10303 AP-238 para la Automatización del Acceso a Datos de Procesos CNC», Revista Iberoamericana de Automática e Informática industrial, 6(1), pp. 105–116. Disponible en: https://polipapers.upv.es/index.php/RIAI/article/view/8354 (Accedido: 5 diciembre 2023).

Número

Vol. 6 Núm. 1 (2009)

Sección

Artículos

Licencia

Creative Commons License

Esta revista se publica bajo una Licencia Creative Commons Attribution-NonCommercial-CompartirIgual 4.0 International (CC BY-NC-SA 4.0)