Implementation of condition-based maintenance (CBM) with FMEA approach to improve productivity of the auto insert machine in electronic component manufacturing
Submitted: 2024-11-29
|Accepted: 2025-04-10
|Published: 2025-06-11
Copyright (c) 2025 Irkham Syifaul Qulub
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Downloads
Keywords:
condition-based maintenance (CBM), failure mode effects analysis (FMEA), manufacture electronic component
Supporting agencies:
Abstract:
This study explores the implementation of Condition-Based Maintenance (CBM) integrated with Failure Mode and Effects Analysis (FMEA) on the Auto Insert Connectors FFC machine, a critical asset in the assembly process of Flexible Flat Cable (FFC) connectors within the electronic components manufacturing industry. The machine plays an essential role in ensuring precision and consistency during the insertion of connector materials, making its reliability a key factor in overall production efficiency. The primary objective of this research is to optimize the maintenance process by transitioning from a preventive maintenance approach to a condition-based strategy utilizing real-time sensors and monitoring systems. FMEA was employed to identify critical failure modes and calculate Risk Priority Numbers (RPNs) for key machine components, which guided the strategic installation of sensors for continuous performance monitoring. Compared to conventional preventive maintenance methods, the implementation of CBM resulted in a 69.75% reduction in inspection time, indicating a substantial improvement in maintenance efficiency. The findings conclude that integrating CBM with real-time data and FMEA significantly enhances operational productivity and minimizes machine downtime. This approach demonstrates strong potential for broader application across various high-precision industries, particularly electronics, automotive, and mining, where equipment reliability is essential to maintaining competitiveness.
References:
Almeida, A.T., Cavalcante, C.A.V., Alencar, M.H., Ferreira, R.J.P., de Almeida-Filho, A.T., Garcez, T.V. (2015). Multiobjective and Multicriteria Decision Processes and Methods. In: Multicriteria and Multiobjective Models for Risk, Reliability and Maintenance Decision Analysis. International Series in Operations Research & Management Science, vol 231. Springer, Cham. https://doi.org/10.1007/978-3-319-17969-8_2
Aucasime-Gonzales, P., Tremolada-Cruz, S., Chavez-Soriano, P., Dominguez, F., & Raymundo, C. (2020). Waste Elimination Model Based on Lean Manufacturing and Lean Maintenance to Increase Efficiency in the Manufacturing Industry. In IOP Conference Series: Materials Science and Engineering (Vol. 999). IOP Publishing Ltd. https://doi.org/10.1088/1757-899X/999/1/012013
Badan Pusat Statistik. (2023). Statistik Indonesia 2023. https://www.bps.go.id/id/publication/2023/02/28/18018f9896f09f03580a614b/statistik-indonesia-2023.html
Bala, A., Rashid, R.Z.J.A., Ismail, I., Oliva, D., Muhammad, N., Sait, S.M., Al-Utaibi, K.A., Amosa, T.I., & Memon, K.A. (2024). Artificial intelligence and edge computing for machine maintenance-review. Artificial Intelligence Review, 57(5), Article 119. https://doi.org/10.1007/s10462-024-10748-9
Banghart, M., Babski-Reeves, K., Bian, L., & Strawderman, L. (2018). Subjectivity in failure mode effects analysis (FMEA) severity classification within a Reliability Centered Maintenance (RCM) context. International Journal of Aviation, Aeronautics, and Aerospace, 5(1). https://doi.org/10.15394/ijaaa.2018.1191
Dobra, P., & Jósvai, J. (2022). Assembly Line Overall Equipment Effectiveness (OEE) Prediction from Human Estimation to Supervised Machine Learning. Journal of Manufacturing and Materials Processing, 6(3). https://doi.org/10.3390/jmmp6030059
Fu, C., Ye, L., Liu, Y., Yu, R., Iung, B., Cheng, Y., & Zeng, Y. (2004). Predictive Maintenance in Intelligent-Control-Maintenance-Management System for Hydroelectric Generating Unit. IEEE Transactions on Energy Conversion, 19(1), 179-186. https://doi.org/10.1109/TEC.2003.816600
Ghatorha, K. S., Sharma, R., & Singh, G. (2022). Lean Manufacturing Through PDCA: A Case Study of a Press Manufacturing Industry. In Lecture Notes on Multidisciplinary Industrial Engineering: Vol. Part F41. https://doi.org/10.1007/978-3-030-73495-4_12
Greig, P. R., Dixson, T., & McCorkell, S. (2020). A process for daily checks when using anaesthetic machines to ventilate the lungs of COVID-19 patients: the 'domino switch' technique. In Anaesthesia (Vol. 75, Issue 7). https://doi.org/10.1111/anae.15098
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006). A review on machinery diagnostics and prognostics implementing condition-based maintenance. In Mechanical Systems and Signal Processing (Vol. 20, Issue 7). https://doi.org/10.1016/j.ymssp.2005.09.012
Kementrian PPN. (2023). Perkembangan ekonomi Indonesia dan dunia. https://perpustakaan.bappenas.go.id/e-library/file_upload/koleksi/migrasi-data-publikasi/file/Update_Ekonomi/Ekonomi_Makro/2023/Laporan%20Perkembangan%20Ekonomi%20Indonesia%20dan%20Dunia%20Triwulan%20III%202023.pdf
Kipchumba, B. B., Chemweno, P., Ochola, J., & Nganyi, E. O. (2024). Statistical mapping and data collection of critical equipment failures in the weaving section of textile manufacturing. Engineering Reports, 6(3). https://doi.org/10.1002/eng2.12743
McDermott, R. E., Mikulak, R. J., & Beauregard, M. R. (2017). THE BASICS OF FMEA, 2nd Edition. In The Basics of FMEA, 2nd Edition. https://doi.org/10.1201/b16656
Mohan, R., Roselyn, J. P., & Uthra, R. A. (2023). LSTM based artificial intelligence predictive maintenance technique for availability rate and OEE improvement in a TPM implementing plant through Industry 4.0 transformation. Journal of Quality in Maintenance Engineering, 29(4). https://doi.org/10.1108/JQME-07-2022-0041
Naranje, V., Naranje, A., & Salunkhe, S. (2019). Improving process performance with world-class manufacturing technique: A case in tea packaging industry. In Lecture Notes in Mechanical Engineering. https://doi.org/10.1007/978-981-13-2718-6_8
Nursanti, E., Avief Suaidy, Sibut, & Kertaningtyas Mariza. (2019). Maintenance Capacity Planning Efisiensi & Produktivitas. Dream Litera Buana. www.dreamlitera.com
Pierce, K., Gopal Gopalkrishnan, Chris Crosby, David Thomason, Curt Hertler, Matt Miller, Zsolt Oros, Regional Account Manager Roland Wedgwood, & Claessens. (2018). A Guidebook to Implementing Condition-Based Maintenance (CBM) Using Real-time Data (2nd ed.). OSIsoft, LLC.
Prawira, A. Y., Rahayu, Y., Hamsal, M., & Purba, H. H. (2018). A Case Study: How 5S Implementation Improves Productivity of Heavy Equipment in Mining Industry. Independent Journal of Management & Production, 9(4), 1184-1202. https://doi.org/10.14807/ijmp.v9i4.826
Shagluf, A., Longstaff, A., & Fletcher, S. (2014). Maintenance strategies to reduce downtime due to machine positional errors. In J. T. Farinha & D. Galar (Eds.), Proceedings of Maintenance Performance Measurement and Management (MPMM) Conference 2014 (pp. 111-118). Universidade de Coimbra. https://doi.org/10.14195/978-972-8954-42-0
Stamatis, D. H. (2003). Failure Mode Effects Analysis: FMEA from Theory to Execution (2nd Edition). American Society for Quality.
Ucar, A., Karakose, M., & Kırımça, N. (2024). Artificial Intelligence for Predictive Maintenance Applications: Key Components, Trustworthiness, and Future Trends. In Applied Sciences (Switzerland) (Vol. 14, Issue 2). https://doi.org/10.3390/app14020898
Wang, K., Dai, G., & Guo, L. (2016). Intelligent Predictive Maintenance (IPdM) for Elevator Service Through CPS, IOT&S and Data Mining. https://doi.org/10.2991/iwama-16.2016.1
Wu, T., Zhao, T., & Xu, S. (2022). Prediction of Remaining Useful Life of the Lithium-Ion Battery Based on Improved Particle Filtering. Frontiers in Energy Research, 10. https://doi.org/10.3389/fenrg.2022.863285
Xu, R., & Kwan, C. (2003). Robust isolation of sensor failures. Asian Journal of Control, 5(1). https://doi.org/10.1111/j.1934-6093.2003.tb00093.x
Yoon, D., Ashok, P., van Oort, E., Annaiyappa, P., Industries, N., & Abe, S. (2023). Field Validation of Scalable Condition-Based Maintenance (CBM) of Mud Pumps. SPE - International Association of Drilling Contractors Drilling Conference Proceedings. https://doi.org/10.2118/212564-MS
Zeng, J., & Liang, Z. (2023). A Deep Gaussian Process Approach for Predictive Maintenance. IEEE Transactions on Reliability, 72(3). https://doi.org/10.1109/TR.2022.3199924
