Value stream mapping as a lean manufacturing tool: A new account approach for cost saving in a textile company
Companies around the world are under pressure to reduce their prices to be competitive. In order to keep profitability, they are adopting lean manufacturing (LM) and its tools to reduce waste and, consequently, the costs. Value stream mapping (VSM) is an efficient LM tool, identifying production flow waste. When it is possible to combine VSM with other LM tool, such as Kanban, a substantial impact in inventory reduction is reached. Additionally, the conventional account system shows limitations in the costs reduction to keep up with LM. The purpose of this paper is to present the results obtained by the application of the VSM combined with Kanban and the new account approach to measure the effectiveness of the cost reduction in the finished goods inventory. Considering that LM tools application in the textile segment has not an expressive number of researches, four hypothesis are presented and validated. The findings are discussed and finally, the research limitations and the practical implications originated by this work are presented as well as topics for further researches are suggested.
Abdulmalek, F. A., Rajgopa, J. (2007). Analyzing the benefits of lean manufacturing and value stream mapping via simulation: A process sector case study, Int. J. Production Economics, 107(1), 223-236. https://doi.org/10.1016/j.ijpe.2006.09.009
Achanga, P., Shehab, E., Roy, R., Nelder, G. (2005). Critical success factors for lean implementation within SMEs, Journal of Manufacturing Technology Management, 17(4), 460-471. https://doi.org/10.1108/17410380610662889
Amorim, A.H. (2011). Competitividade internacional do complexo têxtil brasileiro no período 1998 a 2006. REDIGE,vol.2.
Andrade, P.F, Pereira, V.G., Conte, E.G.D. (2015). Value stream mapping and lean simulation: a case study in automotive company, International Journal in Advance Technology, 85(1-4), 547-555. https://doi.org/10.1007/s00170-015-7972-7
Barfield, J.T., Raiborn, C.A., Kinney, M.R. (1994).Cost Accounting: Traditions and Innovations. 4th ed. N.p.: South-Western College Pub. Print.
Bhamu, J., Sangwan, K.S. (2014). Lean Manufacturing: literature review and research issues. International Journal of Operations and Production Management, vol. 34 (7), 876-940. https://doi.org/10.1108/IJOPM-08-2012-0315
Bortolotti, T., Boscari, S., Danese, P. (2015). Successful Lean Implementation: Organizational Culture and Soft Lean Practices. International Journal of Production Economics, 160, 182-201. https://doi.org/10.1016/j.ijpe.2014.10.013
Boyle, T., Scherrer-Rathje, M., Stuart, I. (2011). Learning to be lean: the influence of external information sources in lean improvements. Journal of Manufacturing Technology Management, 28(5), 587-603. https://doi.org/10.1108/17410381111134455
Braglia, M., Carmignani, G., Zammori, F. (2006). A new value stream mapping approach for complex production systems, International Journal of Production Research, 44(18-19), 3929-3952. https://doi.org/10.1080/00207540600690545
Callen, J.L., Morel, M., Fader, C. (2003). The Profitability-Risk Tradeoff of Just-in-time Manufacturing Technologies. Managerial and Decision Economics, 24(5), 393-402. https://doi.org/10.1002/mde.1104
Carnes, K., Hedin, S. (2005). Accounting for Lean Manufacturing: Another Missed Opportunity?. Management Accounting Quarterly, 7(1), 28-35.
Carvalho, C.P., Gomes, F.M., N.Silva, J.P., Silva, M.B. (2017). Lean Manufacturing in Continuous Manufacturing Systems: A Literature Review. International Journal of Research Studies in Science, Engineering and Technology, v.4, p. 1-13.
Cirino, S.R.A., Gonçalves, H.S., Queiroz, F.C.B.P., Queiroz, J.V., Hekis, H.R. (2013). Sistema de Produc¸a~o Enxuta: analisando as pra´ticas adotadas em uma indu´stria te^xtil paraibana. GEPROS. Gesta~o da Produc¸a~o, Operac¸o~es e Sistemas, Bauru, Ano 8, no 1, 9-21.
Chauhan, G. (2016). An analysis of the status of resource flexibility and lean manufacturing in a textile machinery manufacturing company. International Journal of Organization Analysis, 24, 107-122. https://doi.org/10.1108/IJOA-11-2012-0625
Chenhall, R.H. (1997). Reliance on manufacturing performance measures, total quality management and organizational performance. Management Accounting Research, 8, 187-206. https://doi.org/10.1006/mare.1996.0038
Cooney, R. (2002). Is “lean” a universal production system?. International Journal of Operations and Production Management, 22(10), 1130-1147. https://doi.org/10.1108/01443570210446342
Cooper, R. (1996). Activity-based management and the lean enterprise, Journal of Cost Management, 69(10), 20-27.
Deflorin, P., Rathje, M.S. (2012). Challenges in the transformation to lean production from different manufacturing – process choices: a path-dependent perspective, International Journal of Production Research, 50(14), 3956-3973. https://doi.org/10.1080/00207543.2011.613862
Dhandapani, V., Potter, A. and Naim, M. (2004). Applying lean thinking: a case study of an Indian steel plant, International Journal of Logistics Research and Applications, 7(3), 239-250. https://doi.org/10.1080/13675560412331298491
Easton, G.S., Jarrell, S.L. (1998). The effects of total quality management on corporate performance: an empirical investigation. Journal of Business, 71(2), 253-307. https://doi.org/10.1086/209744
Flanagan, R. (2008). The Review of Policing: Final Report. London: Home Office, 9-13.
Green, J.C., Lee, J., Kozman, T.A. (2010). Managing lean manufacturing in material handling operations, International Journal of Production Research, 48(10), 2975-2993. https://doi.org/10.1080/00207540902791819
Gurumurthy, A., Kodali, R. (2011). Design of lean manufacturing systems using value stream mapping with simulation, Journal of Manufacturing Technology Management, 22(4), 444-473. https://doi.org/10.1108/17410381111126409
Hedelind, M., Jackson, M. (2011). How to improve the use of industrial robots in lean manufacturing systems, Journal of Manufacturing Technology Management, 22(7), 891-905. https://doi.org/10.1108/17410381111160951
Hines, P., Rich, N. (1997). The seven value stream mapping tools, International Journal of Operations and Production, 17(1), 46-64. https://doi.org/10.1108/01443579710157989
Hines, P., Rich, N., Esain, A. (1999). Value stream mapping: A distribution industry application. Benchmarking: An International Journal, 6(1), 60-77. https://doi.org/10.1108/14635779910258157
Hines, P., Holweg, M., Rich, N. (2004). Learning to evolve, International Journal of Operations and Production Management, 24(10), 994-1011. https://doi.org/10.1108/01443570410558049
Hodge, G.L., Ross, K.G., Joines, J.A., Thoney, K. (2011). Adapting lean manufacturing principles to the textile industry, Production Planning and Control, 22(3), 237-247. https://doi.org/10.1080/09537287.2010.498577
Holweg, M. (2003). The three-day car challenge – investigating the inhibitors of responsive order fulfillment in new vehicle supply systems, International Journal of Logistics: Research and Applications, 6(3), 165-183. https://doi.org/10.1080/1367556031000123106
Hu, Q., Mason, R., Williams, S., Found, P. (2015). Lean Implementation within SMEs: a Literature Review. Journal of Manufacturing Technology Management, 26, 980-1012. https://doi.org/10.1108/JMTM-02-2014-0013
Huntzinger, J.R. (2007). Lean Cost Management: Accounting for Lean by Establishing Flow, J. Ross Publishing, Inc., Fort Lauderda, FL.
Jasti, N., Kodali, R. (2014).A literature review of empirical research methodology in Lean Manufacturing. International Journal of Operations and Production Management, 34(8), 1080-1122. https://doi.org/10.1108/IJOPM-04-2012-0169
Kaplan, R. S. 1990. The Four-Stage Model of Cost Systems Design. Management Accounting (February): 22-26.
Kaplan, R. S., Norton, D. (1992). “The Balanced Scorecard: Measures that Drive Performance.” Harvard Business Review, 70, 71–79.
Karthi, S., Devadasan, S.R., Selvaraju, K., Sivaram, N.M., Sreenivasa, C.G. (2013). Implementation of Lean Six Sigma through ISO 9001:2008 based QMS: a case study in a textile mill, The Journal of The Textile Institute, 104(10), 1089-1100. https://doi.org/10.1080/00405000.2013.774945
Kennedy, F., Brewer, P. (2005). Lean accounting: what’s it all about? Strategic Finance, November, 27-34.
Krumwiede, K.R. 1998. ABC: Why it’s tried and how it succeeds. Management Accounting (April), 32-34, 36, 38.
Kuniyoshi, D.S. (2006). Implementação da Metodologia Lean Seis Sigma em uma empresa do setor têxtil. Dissertação de graduação. Universidade de São Paulo.
Leone, G.S.G. (1996). Custos: planejamento, implantaçã o e controle. 2. Ed. São Paulo: Editora Atlas.
Lopez, P.R.D.A., Fortuny-Santos, J., Cuatrecasas-Arbós, L. (2013). Lean Manufacturing: Costing the Value Stream: Industrial Management and Data Systems: Vol 113, No 5. Emerald Insight, Web. 17 Oct. 2016. https://doi.org/10.1108/02635571311324124
Lourenço Jr, J. (2012). A produçã o enxuta em um sistema de fabricaçã o contínuo:aplicaçã o da simulaçã o discreta estocástica na indústria de condutores elétricos. Dissertação de doutorado. Universidade Estadual Paulista-Júlio de Mesquita Filho. Guaratinguetá.
Mahapatra, S.S., Mohanty, S.R. (2007). Lean manufacturing in a continuous process industry: a case of study, Journal of Scientific and Industrial Research, 66, 19-27.
Martins, E. (2008). Contabilidade de Custo, Atlas, Sao Paulo, 34, 102-105.
Maskell, B.H. (2000). “Lean accounting for lean manufacturers”, Manufacturing Engineering, 125(6), 46-53.
Maskell, B.H., Baggaley, B. (2003). Practical lean accounting: a proven system for measuring and managing the lean enterprise. New York: Productivity Press. https://doi.org/10.1201/b11454
McDonald T., Van Aken E.M., Rentes, A.F. (2002). Utilizing simulation to enhance value stream mapping: a manufacturing case application, International Journal of Logistics: Res and Appl. 5(2), 213-232. https://doi.org/10.1080/13675560210148696
Milnitz, D., Tubino, D.F. (2013). Aplicação do método de Mapeamento de Fluxo de Valor no setor de engenharia de uma empresa têxtil, Exacta, 11(2), 199-212. https://doi.org/10.5585/exactaep.v11n2.4127
Monica, Z. (2015). Virtual Modeling of Components of a Production System as the Tool of Lean Engineering. IOP Conference Series: Materials Science and Engineering, 95, (6pp). https://doi.org/10.1088/1757-899X/95/1/012109
Oberhausen, C., Plapper, P. (2015). Value Stream Management in the” Lean Manufacturing Laboratory”. Procedia CIRP, 32, 144-149. https://doi.org/10.1016/j.procir.2015.02.087
Ohno, T. (1997). O Sistema Toyota de Produçã o, Além da Produçã o em Larga Escala. Porto Alegre: Bookman, 137.
Ohno, T. (1988). Just - in - Time for today and tomorrow. Productivity Press.
Onyeocha, C., Khoury, J., Geragthy, J. (2015), Evaluating of multi-product: lean manufacturing systems with setup and erratic demand. Computer and Industrial Engineering, 87, 465. https://doi.org/10.1016/j.cie.2015.05.029
Palauro, R.L. (2014). Lean manicuring: value stream mapping: map of the current situation and highlights for the problems identified in the line and production of pulp- Limeira, SP: [s. n.], 26 f.
Panwar, A., Nepal, B. P., Jain, R., Rathore, A. P. S. (2015). On the adoption of lean manufacturing principles in process industries, Production Planning and Control, 26:7, 564-587. https://doi.org/10.1080/09537287.2014.936532
Panwar, A., Jain, R., Rathore, A. P. S. (2013). Lean implementation in Indian process industries – some empirical evidence, Journal of Manufacturing Technology Management, 26(1), 131-160. https://doi.org/10.1108/JMTM-05-2013-0049
Powell, D., Riezebos, J., Strandhagen, O. (2013). Lean production and ERP systems in small-medium –sized enterprises: ERP support for pull production, International Journal of Production Research, 51(2), 395-409. https://doi.org/10.1080/00207543.2011.645954
Ratnayake, R.M.C., Chaudry, M.O. (2015). Performance Improvement of Oil and Gas Industry via Lean Concept: A Case Study from Valves Requisition. 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). https://doi.org/10.1109/IEEM.2015.7385892
Rother, M., Shook, J. (1999). Learning to See: Value Stream Mapping to Add Value and Eliminate Muda, The Lean Enterprise Institute, Inc., Brookline, MA.
Rother, M., Shook, J. (2003). Creating Continuous Flow, The Lean Enterprise Institute: Massachusetts.
Schimidtke, D., Heiser, U., Hinrichsen, O. (2014). A simulation enhanced value stream mapping approach for optimization of complex production environments, International Journal of Production research, 52:20, 6146-6160. https://doi.org/10.1080/00207543.2014.917770
Serrano, I., Ochoa, C., Castro, R. (2008). Evaluation of value stream mapping in manufacturing redesign, International Journal of Production Research, 46(16), 4409-4430. https://doi.org/10.1080/00207540601182302
Seth, D., Seth, N., Goel, D. (2008). Application of value stream mapping (VSM) for minimization of wastes in the processing side of supply chain of cottonseed oil industry in Indian context. Journal of Manufacturing Technology Management , 19(4), 529-550. https://doi.org/10.1108/17410380810869950
Soliman, F. (1998). Optimum level of process mapping and least cost business process re-engineering. International Journal of Operations and Production Management, 18(9/10), 810-816. https://doi.org/10.1108/01443579810225469
Susilawati, A., Tan, J., Bell, D., Sarwar, M. (2015). Fuzzy logic based method to measure degree of lean activity in manufacturing industry. Journal of Manufacturing Systems, 34, 1-11. https://doi.org/10.1016/j.jmsy.2014.09.007
Sutari, O. (2015). Process Improvement using Lean Principles on the Manufacturing of Wind Turbine Components- a Case Study. Materials Today: Proceedings, 2, 3429-3437. https://doi.org/10.1016/j.matpr.2015.07.318
Upadhye, N., Deshmukh, S.G., Garg, S. (2010). “Lean Manufacturing in Biscuit Manufacturing Plant: A Case.” International Journal of Advanced Operations Management, 2(1/2): 108-139. https://doi.org/10.1504/IJAOM.2010.034589
Vanderbeck, E.J. (2010). Principles of Cost Accounting. Mason, OH: Thomson/South-Western, 22-38. Print.
Vinoth, S., Arvind, K.R., Somanaathan, M. (2010). Application of value stream mapping in an Indian camshaft manufacturing organization, Journal of manufacturing Technology Management, 21(7), 888-900. https://doi.org/10.1108/17410381011077973
Walther, L.M. (2013). Financial Accounting. San Bernardino, CA: Principles of accounting.com, 12-18. Print.
Werkema, M. (2011). Lean seis sigma: introduçã o às ferramentas do lean manufacturing -2. ed- Rio de Janeiro: Elsevier.
Womack, J.P., Jones, D.T., Ross, D. (1990). The Machine that Changed the World, Macmillan Publishing Company, Canada.
Womack, J.P., Jones, D.T. (1996). Lean thinking: Banish Waste and Create Wealth in your corporation, Simon and Schuster, New York, NY. https://doi.org/10.1057/palgrave.jors.2600967
Yang, T., Kuo, Y., Su, C.T., Hou, C.L. (2015). Lean production system design for fishing net manufacturing using lean principles and simulation optimization, Journal of Manufacturing Systems, 34, 66-73. https://doi.org/10.1016/j.jmsy.2014.11.010
Metrics powered by PLOS ALM
Cited-By (articles included in Crossref)
This journal is a Crossref Cited-by Linking member. This list shows the references that citing the article automatically, if there are. For more information about the system please visit Crossref site
1. The effect of lean on occupational health and safety and productivity in the garment industry – a literature review
Abu Hamja, Malek Maalouf, Peter Hasle
Production & Manufacturing Research vol: 7 issue: 1 first page: 316 year: 2019
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
Universitat Politècnica de València
e-ISSN: 2340-4876 ISSN: 2340-5317 https://doi.org/10.4995/ijpme