The influence of the sustainability factor in production planning: A systematic literature review

Considering environmental, economic, and social sustainability in production planning has become a priority research topic to achieve significant improvements in production systems. For this reason, the objective of this study is to analyze the impact, the approach, and the potential benefits of sustainability in production planning. Using systematic literature review as a base methodology and supported by a content analysis, patterns, trends, and relationships between different elements, such as keywords, authors, and thematic areas, were identified. The impact of sustainability on production planning shows that (i) the environmental dimension seeks as a priority the reduction of greenhouse gases; (ii) the economic dimension the reduction of costs; and (iii) the social dimension focuses more on the generation of employment, however, a balance between these three dimensions is not observed. In the reviewed scientific papers, the most commonly used approach is the combination of economic and environmental dimensions, seeking to implement strategies that allow increasing profits without compromising the environment. Finally, it is evident that by adopting a sustainable approach, corporate performance can be improved, which allows to respond to customer demands, and comply with regulatory pressures.

Show more Show less

References:

Alam, T. (2023). Sustainable Multi-Objective Production Planning for the Refrigerating and Air Conditioning Industry in Saudi Arabia: A Preemptive Goal Programming Approach. Sustainability (Switzerland), 15(4). https://doi.org/10.3390/su15043346

Aydin, N. S., & Tirkolaee, E. B. (2022). A systematic review of aggregate production planning literature with an outlook for sustainability and circularity. Environment, Development and Sustainability. https://doi.org/10.1007/s10668-022-02304-8

Biel, K., & Glock, C. H. (2016). Systematic literature review of decision support models for energy efficient production planning. Computers & Industrial Engineering, 101, 243–259. https://doi.org/10.1016/j.cie.2016.08.021

Brundtland, Gro Harlem, & and others. (1987). Informe de la Comisión Mundial sobre Medio Ambiente y el Desarrollo: Nuestro futuro común. Documentos de Las Naciones, 416.

Cheraghalikhani, A., Khoshalhan, F., & Mokhtari, H. (2019). Aggregate production planning: A literature review and future research directions. International Journal of Industrial Engineering Computations, 10(2), 309–330. https://doi.org/10.5267/j.ijiec.2018.6.002

Chiu, Y.S. P., Lin, J.N., Wang, Y., & Chen, H.Y. (2022). Collective impact of scrap, random breakdown, overtime and discontinuous issuing on batch production planning in a supply-chain environment. Uncertain Supply Chain Management, 10(1), 181–196. https://doi.org/10.5267/j.uscm.2021.9.009

Costa, I. de S., Neto, G. C. de O., & Leite, R. R. (2021). How does the use of PPC tools/activities improve eco-efficiency? A systematic literature review. Production Planning & Control, 32(7), 526–548. https://doi.org/10.1080/09537287.2020.1743890

Dal Borgo, E., & Meneghetti, A. (2019). Production and shipment planning for Project Based Enterprises: Exploiting learning-forgetting phenomena for sustainable assembly of Curtain Walls. Computers and Industrial Engineering, 131, 488–501. https://doi.org/10.1016/j.cie.2019.01.058

Elkington, J., & Rowlands, I. H. (1999). [Cannibals with forks: the triple bottom line of 21st century business]. Alternatives Journal, 25(4), 42–43. https://www.proquest.com/openview/804cc9d98196ef6e26d88748e89f8db0/1?pq-origsite=gscholar&cbl=35934

Entezaminia, A., Heidari, M., & Rahmani, D. (2017). Robust aggregate production planning in a green supply chain under uncertainty considering reverse logistics: a case study. International Journal of Advanced Manufacturing Technology, 90(5–8), 1507–1528. https://doi.org/10.1007/s00170-016-9459-6

Entezaminia, A., Heydari, M., & Rahmani, D. (2016). A multi-objective model for multi-product multi-site aggregate production planning in a green supply chain: Considering collection and recycling centers. Journal of Manufacturing Systems, 40, 63–75. https://doi.org/10.1016/j.jmsy.2016.06.004

Eslami, R., Abedini, M., Zokaee, M., Rabbani, M., & Aghsami, A. (2024). Bi-objective optimization modeling of a three-level supply chain in production planning and scheduling considering price-dependent demand: a case study of a soap factory. RAIRO - Operations Research, 58(6), 4997–5028. https://doi.org/10.1051/ro/2024197

Flores-Siguenza, P., Marmolejo-Saucedo, J. A., & Guamán, R. (2023). Multi-objective optimization model for sustainable production planning in textile MSMEs. EAI Endorsed Transactions on Industrial Networks and Intelligent Systems, 10(3). https://doi.org/10.4108/eetinis.v10i3.3752

Ghanbarzadeh-Shams, M., Ghasemy Yaghin, R., & Sadeghi, A. H. (2022). A hybrid fuzzy multi-objective model for carpet production planning with reverse logistics under uncertainty. Socio-Economic Planning Sciences, 83. https://doi.org/10.1016/j.seps.2022.101344

Gong, D.-C., Kao, C.-W., & Peters, B. A. (2019). Sustainability investments and production planning decisions based on environmental management. Journal of Cleaner Production, 225, 196–208. https://doi.org/10.1016/j.jclepro.2019.03.256

Gordon, C. A. K., & Pistikopoulos, E. N. (2022). Data-driven and safety-aware holistic production planning. Journal of Loss Prevention in the Process Industries, 77. https://doi.org/10.1016/j.jlp.2022.104754

Guo, Z., Gao, J., Dong, Y., & Du, J. (2024). Integrated batch production planning and scheduling with machine-learning based production capacity region considering wind energy system. Journal of Cleaner Production, 477. https://doi.org/10.1016/j.jclepro.2024.143804

Han, L., Wu, P., & Chu, C. (2023). A distributionally robust production planning model for maximizing customer satisfaction with budget and carbon emissions constraints. Computers and Industrial Engineering, 182. https://doi.org/10.1016/j.cie.2023.109412

Hilbert, M., Dellnitz, A., Kleine, A., & Tavana, M. (2023). A novel indicator for sustainability in production planning using Center of Gravity-based assessment of Pareto fronts. Computers and Industrial Engineering, 185. https://doi.org/10.1016/j.cie.2023.109618

Hong, Z., Chu, C., & Yu, Y. (2016). Dual-mode production planning for manufacturing with emission constraints. European Journal of Operational Research, 251(1), 96–106. https://doi.org/10.1016/j.ejor.2015.11.015

Jabbour, A. B. L. de S., Malin, S., & and Godinho Filho, M. (2020). Sustainability implications for operations management: building the bridge through exemplar case studies. Production Planning & Control, 31(11–12), 841–844. https://doi.org/10.1080/09537287.2019.1695926

Kenné, J.-P., Dejax, P., & Gharbi, A. (2012). Production planning of a hybrid manufacturing-remanufacturing system under uncertainty within a closed-loop supply chain. International Journal of Production Economics, 135(1), 81–93. https://doi.org/10.1016/j.ijpe.2010.10.026

Khaled, M. S., Shaban, I. A., Karam, A., Hussain, M., Zahran, I., & Hussein, M. (2022). An Analysis of Research Trends in the Sustainability of Production Planning. Energies, 15(2). https://doi.org/10.3390/en15020483

Korkulu, S., & Bóna, K. (2019). Ergonomics as a social component of sustainable lot-sizing: A review. Periodica Polytechnica Social and Management Sciences, 27(1), 1–8. https://doi.org/10.3311/PPso.12286

Kumar, A., & Kumar, K. (2024). A multi-objective optimization approach for designing a sustainable supply chain considering carbon emissions. International Journal of System Assurance Engineering and Management, 15(5), 1777–1793. https://doi.org/10.1007/s13198-023-02085-x

Lahmar, H., Dahane, M., Mouss, K. N., & Haoues, M. (2024). Multi-objective sustainable production planning for a hybrid multi-stage manufacturing-remanufacturing system with grade-based classification of recovered and remanufactured products. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-023-02308-9

Larizadeh, R., & Tosarkani, B. M. (2025). A novel data-driven rolling horizon production planning approach for the plastic industry under the uncertainty of demand and recycling rate. Expert Systems with Applications, 263. https://doi.org/10.1016/j.eswa.2024.125728

Leseure, M. (2024). From Aggregate Production Planning to Aggregate Energy Industrial Consumption Plans. Energies, 17(24). https://doi.org/10.3390/en17246388

Lopes de Sousa Jabbour, A. B., Rojas Luiz, J. V., Rojas Luiz, O., Jabbour, C. J. C., Ndubisi, N. O., Caldeira de Oliveira, J. H., & Junior, F. H. (2019). Circular economy business models and operations management. Journal of Cleaner Production, 235, 1525–1539. https://doi.org/10.1016/j.jclepro.2019.06.349

May, M. C., Kiefer, L., Frey, A., Duffie, N. A., & Lanza, G. (2023). Solving sustainable aggregate production planning with model predictive control. CIRP Annals, 72(1), 421–424. https://doi.org/10.1016/j.cirp.2023.04.023

Mehdizadeh, E., Niaki, S. T. A., & Hemati, M. (2018). A bi-objective aggregate production planning problem with learning effect and machine deterioration: Modeling and solution. Computers & Operations Research, 91, 21–36. https://doi.org/10.1016/j.cor.2017.11.001

Naranjo, I., Torre, R. de la, & Boza, A. (2025). Sustainable Decision-Making in SMEs of the Textile Industry: Integrating Methodologies, Practices, and Barriers. Business Strategy and the Environment. https://doi.org/10.1002/bse.4295

Qasim, M., & Wong, K. Y. (2024). A fuzzy multi-objective model for aggregate production planning considering energy consumption, carbon emission, chemical, solid waste, and wastewater. Journal of Cleaner Production, 475. https://doi.org/10.1016/j.jclepro.2024.143644

Raoufi, K., Tajasob, P., Al-e-Hashem, S. M. J. M., & Jokar, M. A. (2025). Challenges, opportunities, and future research directions of aggregate production planning: A State-of-the-Art analysis of sustainability, uncertainty, and case studies. Journal of Cleaner Production, 489. https://doi.org/10.1016/j.jclepro.2025.144686

Rasmi, S. A. B., Kazan, C., & Türkay, M. (2019). A multi-criteria decision analysis to include environmental, social, and cultural issues in the sustainable aggregate production plans. Computers and Industrial Engineering, 132, 348–360. https://doi.org/10.1016/j.cie.2019.04.036

Rastgar, I., Rezaeian, J., Mahdavi, I., & Fattahi, P. (2024). Modeling and solving the multi-objective energy-efficient production planning and scheduling with imperfect maintenance activities. Journal of Quality in Maintenance Engineering, 30(1), 26–50. https://doi.org/10.1108/JQME-10-2022-0068

Saeed Khaled, M., Abdelfadeel Shaban, I., & Hegab, H. (2024). Enhancing socioeconomic sustainability in glass wall panel manufacturing: An integrated production planning approach. Computers and Industrial Engineering, 197. https://doi.org/10.1016/j.cie.2024.110571

Serrano-Ruiz, J. C., Mula, J., & Poler, R. (2021). Smart manufacturing scheduling: A literature review. Journal of Manufacturing Systems, 61, 265–287. https://doi.org/10.1016/J.JMSY.2021.09.011

Sinha, R. K., & Chaturvedi, N. D. (2018). A graphical dual objective approach for minimizing energy consumption and carbon emission in production planning. Journal of Cleaner Production, 171, 312–321. https://doi.org/10.1016/j.jclepro.2017.09.272

Suzanne, E., Absi, N., & Borodin, V. (2020). Towards circular economy in production planning: Challenges and opportunities. European Journal of Operational Research, 287(1), 168–190. https://doi.org/10.1016/j.ejor.2020.04.043

Thomé, A. M. T., Scavarda, L. F., & Scavarda, A. J. (2016). Conducting systematic literature review in operations management. Production Planning & Control, 27(5), 408–420. https://doi.org/10.1080/09537287.2015.1129464

Tirkolaee, E. B., Aydin, N. S., & Mahdavi, I. (2022). A Hybrid Biobjective Markov Chain Based Optimization Model for Sustainable Aggregate Production Planning. IEEE Transactions on Engineering Management, 1–11. https://doi.org/10.1109/TEM.2022.3210879

Tirkolaee, E. B., Aydin, N. S., & Mahdavi, I. (2023). A bi-level decision-making system to optimize a robust-resilient-sustainable aggregate production planning problem. Expert Systems with Applications, 228, 120476. https://doi.org/10.1016/j.eswa.2023.120476

Trost, M., Claus, T., & Herrmann, F. (2022). Social Sustainability in Production Planning: A Systematic Literature Review. Sustainability (Switzerland), 14(13). https://doi.org/10.3390/su14138198

Tsai, W.H. (2018). Green production planning and control for the textile industry by using mathematical programming and industry 4.0 techniques. Energies, 11(8). https://doi.org/10.3390/en11082072

Wang, C.-N., Nhieu, N.-L., & Tran, T. T. T. (2021). Stochastic Chebyshev Goal Programming Mixed Integer Linear Model for Sustainable Global Production Planning. Mathematics, 9(5). https://doi.org/10.3390/math9050483

Wu, C.C., & Chang, N.B. (2004). Corporate optimal production planning with varying environmental costs: A grey compromise programming approach. European Journal of Operational Research, 155(1), 68–95. https://doi.org/10.1016/S0377-2217(02)00820-2

Yazdani, M. A., Khezri, A., & Benyoucef, L. (2022). Process and production planning for sustainable reconfigurable manufacturing systems (SRMSs): multi-objective exact and heuristic-based approaches. International Journal of Advanced Manufacturing Technology, 119(7–8), 4519–4540. https://doi.org/10.1007/s00170-021-08409-0

Yousefi, S., Baqeri, M., Tosarkani, B. M., Amin, S. H., & Zolfagharinia, H. (2023). A decision support framework for sustainable production planning of paper recycling systems. Computers and Industrial Engineering, 183. https://doi.org/10.1016/j.cie.2023.109500

Zarte, M., Pechmann, A., & Nunes, I. L. (2019). Indicator framework for sustainable production planning and controlling. International Journal of Sustainable Engineering, 12(3), 149–158. https://doi.org/10.1080/19397038.2019.1566410

Zarte, M., Pechmann, A., & Nunes, I. L. (2021). Fuzzy Inference Model for Decision Support in Sustainable Production Planning Processes—A Case Study. Sustainability, 13(3). https://doi.org/10.3390/su13031355

Zhang, T., Shen, F., Li, Z., Peng, X., & Zhong, W. (2025). Synergizing low-carbon planning and operation for sustainable integrated refinery-petrochemical processes under arrival time uncertainty: A large-scale hierarchical energy-efficiency optimization perspective. Applied Energy, 377. https://doi.org/10.1016/j.apenergy.2024.124497

Zheng, M., Li, W., Liu, Y., & Liu, X. (2020). A Lagrangian heuristic algorithm for sustainable supply chain network considering CO2 emission. Journal of Cleaner Production, 270. https://doi.org/10.1016/j.jclepro.2020.122409

Zupic, I., & Čater, T. (2015). Bibliometric Methods in Management and Organization. Organizational Research Methods, 18(3), 429–472. https://doi.org/10.1177/1094428114562629

Show more Show less