Integrating human-centric simulations in educational production lines: advancing ergonomics for industry 5.0 applications
Submitted: 2023-12-23
|Accepted: 2024-03-29
|Published: 2024-05-07
Copyright (c) 2024 Aitor Ruiz de la Torre, Jon Borregan , Naiara Pikatza, Rosa Maria Rio
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Downloads
Keywords:
Industry 5.0, Human-centered production, Simulation, Ergonomics, Inertial Sensors, Digital Twin
Supporting agencies:
Abstract:
This research in the Industry 5.0 field focuses on a human-centered simulation of the FAS200 SMC educational production line, utilizing Tecnomatix Process Simulate Human software for developing a virtual human environment. A key aspect of this study is the integration of inertial sensors, enhancing the accuracy and depth of ergonomic analysis. These sensors play a pivotal role in capturing precise human movement data, crucial for ergonomic assessments. Adopting a defined working methodology, the study extensively employs the RULA method to evaluate operator postures in the production line. This approach has led to significant ergonomic improvements, evidenced by a 40 percent reduction in the RULA index at each workstation. The integration of inertial sensors has been instrumental in achieving these results, providing detailed insights into human movements and interactions with the production environment. The research transcends traditional ergonomic assessments by incorporating a new human-centered approach, emphasizing the well-being of individuals working alongside machines. This approach, bolstered by the use of inertial sensors, marks a significant advancement in ergonomic studies, aligning with the principles of Industry 5.0. The findings hold substantial potential for application in industrial settings, signaling a shift towards more human-friendly and efficient industrial practices.
References:
Agote-Garrido, A., Martín-Gómez, A. M., & Lama-Ruiz, J. R. (2023). Manufacturing System Design in Industry 5.0: Incorporating Sociotechnical Systems and Social Metabolism for Human-Centered, Sustainable, and Resilient Production. Systems, 11(11), 537. https://doi.org/10.3390/systems11110537
Ahmed, S., & Sobuz, M. H. R. (2020). Challenges of implementing lean construction in the construction industry in Bangladesh. Smart and Sustainable Built Environment, 9(2), 174-207. https://doi.org/10.1108/SASBE-02-2019-0018
Association International Ergonomics, 2003. (2003). International Ergonomics Association 2003. IEA Triennial Report 2000-2003.(Santa Monica, CA).
Baba, E., Baba, D., Practice, J. O.-J. of E. and, & 2021, U. (2021). Effect of Office Ergonomics on Office Workers' Productivity in the Polytechnics, Nigeria. Journal of Education and Practice, 12(3), 2021. https://doi.org/10.7176/JEP/12-3-10
Barkokebas, R. D., Ritter, C., Li, X., & Al-Hussein, M. (2020). Application of virtual reality to perform ergonomic risk assessment in industrialized construction: Experiment design. Construction Research Congress 2020: Safety, Workforce, and Education - Selected Papers from the Construction Research Congress 2020, 405-413. https://doi.org/10.1061/9780784482872.044
Bellusci, G., Dijkstra, F., & Slycke, P. (2013). Xsens MTw : Miniature Wireless Inertial Motion Tracker for Highly Accurate 3D Kinematic Applications. Xsens Technologies, April, 1-9. www.xsens.com,
Blume, K. S., Holzgreve, F., Fraeulin, L., Erbe, C., Betz, W., Wanke, E. M., Brueggmann, D., Nienhaus, A., Maurer-Grubinger, C., Groneberg, D. A., & Ohlendorf, D. (2021). Ergonomic risk assessment of dental students-RULA applied to objective kinematic data. International Journal of Environmental Research and Public Health, 18(19), 10550. https://doi.org/10.3390/ijerph181910550
Boschetti, G., Faccio, M., & Granata, I. (2023). Human-Centered Design for Productivity and Safety in Collaborative Robots Cells: A New Methodological Approach. Electronics (Switzerland), 12(1). https://doi.org/10.3390/electronics12010167
Buckle, P. W., & Jason Devereux, J. (2002). The nature of work-related neck and upper limb musculoskeletal disorders. In Applied Ergonomics (Vol. 33, Issue 3, pp. 207-217). https://doi.org/10.1016/S0003-6870(02)00014-5
Calzavara, M., Faccio, M., & Granata, I. (2023). Multi-objective task allocation for collaborative robot systems with an Industry 5.0 human-centered perspective. International Journal of Advanced Manufacturing Technology, 128(1-2), 297-314. https://doi.org/10.1007/s00170-023-11673-x
Colim, A., Morgado, R., Carneiro, P., Costa, N., Faria, C., Sousa, N., Rocha, L. A., & Arezes, P. (2021). Lean manufacturing and ergonomics integration: Defining productivity and wellbeing indicators in a human-robot workstation. Sustainability (Switzerland), 13(4), 1-21. https://doi.org/10.3390/su13041931
Colla, V., Matino, R., Schröder, A. J., Schivalocchi, M., & Romaniello, L. (2021). Human-centered robotic development in the steel shop: Improving health, safety and digital skills at the workplace. Metals, 11(4). https://doi.org/10.3390/met11040647
Coronado, E., Kiyokawa, T., Ricardez, G. A. G., Ramirez-Alpizar, I. G., Venture, G., & Yamanobe, N. (2022). Evaluating quality in human-robot interaction: A systematic search and classification of performance and human-centered factors, measures and metrics towards an industry 5.0. Journal of Manufacturing Systems, 63, 392-410. https://doi.org/10.1016/j.jmsy.2022.04.007
da Silva, A. G., Gomes, M. V. M., & Winkler, I. (2022). Virtual Reality and Digital Human Modeling for Ergonomic Assessment in Industrial Product Development: A Patent and Literature Review. In Applied Sciences (Switzerland) (Vol. 12, Issue 3, p. 1084). Multidisciplinary Digital Publishing Institute. https://doi.org/10.3390/app12031084
Diego-Mas, J. (2023). RULA software - Ergonomics Software for Worksites. Ergonautas, Universidad Politécnica de Valencia. https://www.ergonautas.upv.es/ergoniza/app_en/land/index.html?method=rula
Donmezer, S., Demircioglu, P., Bogrekci, I., Bas, G., & Durakbasa, M. N. (2023). Revolutionizing the Garment Industry 5.0: Embracing Closed-Loop Design, E-Libraries, and Digital Twins. Sustainability, 15(22), 15839. https://doi.org/10.3390/su152215839
Dul, J., Bruder, R., Buckle, P., Carayon, P., Falzon, P., Marras, W. S., Wilson, J. R., & van der Doelen, B. (2012). A strategy for human factors/ergonomics: Developing the discipline and profession. Ergonomics, 55(4), 377-395. https://doi.org/10.1080/00140139.2012.661087
Fatima, Z., Hassan Tanveer, M., Zardari, S., Falak Naz, L., Khadim, H., Ahmed, N., & Tahir, M. (2022). Production plant and warehouse automation with IoT and industry 5.0. Mdpi.ComZ Fatima, MH Tanveer, Waseemullah, S Zardari, LF Naz, H Khadim, N Ahmed, M TahirApplied Sciences, 2022•mdpi.Com. https://doi.org/10.3390/app12042053
Gašová, M., Gašo, M., & Štefánik, A. (2017). Advanced Industrial Tools of Ergonomics Based on Industry 4.0 Concept. Procedia Engineering, 192, 219-224. https://doi.org/10.1016/j.proeng.2017.06.038
Grabowska, S., Saniuk, S., & Gajdzik, B. (2022). Industry 5.0: improving humanization and sustainability of Industry 4.0. Scientometrics, 127(6), 3117-3144. https://doi.org/10.1007/s11192-022-04370-1
Grandi, F., Peruzzini, M., Raffaeli, R., & Pellicciari, M. (2022). Trends in Human Factors Integration for the Design of Industry 4.0. Lecture Notes in Mechanical Engineering, 785-792. https://doi.org/10.1007/978-3-030-91234-5_79
Gualtieri, L., Palomba, I., Merati, F. A., Rauch, E., & Vidoni, R. (2020). Design of human-centered collaborative assembly workstations for the improvement of operators' physical ergonomics and production efficiency: A case study. Sustainability (Switzerland), 12(9), 3606. https://doi.org/10.3390/su12093606
Hadidi, L. A., Kolus, A., & AlKhamis, M. (2019). Quality improvement through ergonomics intervention at chemical plant. Facilities, 37(5-6), 266-279. https://doi.org/10.1108/F-06-2018-0068
Hendric, H. W., & Kleiner, B. M. (2002). Macroergonomics; An Introduction to Work System Design. Ergonomics in Design: The Quarterly of Human Factors Applications, 10(2), 19-21. https://doi.org/10.1177/106480460201000206
Hignett, S., & McAtamney, L. (2000). Rapid Entire Body Assessment (REBA). Applied Ergonomics, 31(2), 201-205. https://doi.org/10.1016/S0003-6870(99)00039-3
Hoffmann, T., Bennett, S., & Del Mar, C. (2023). Evidence-based Practice across the Health Professions, by Tammy Hoffmann, Sally Bennett and Chris Del Mar. In Elsevier Health Science. https://doi.org/10.1071/HC10259b
Holoči, J., Technology, F. C.-H., & 2022, undefined. (2022). Process management of ergonomic workplace based on augmented reality principles. Publikace.k.Utb.CzJ Holoči, F ChromjakováHuman Technology, 2022•publikace.k.Utb.Cz, 18(1), 66-91. https://doi.org/10.14254/1795-6889.2022.18-1.5
Ivanov, D. (2022). The Industry 5.0 framework: viability-based integration of the resilience, sustainability, and human-centricity perspectives. Https://Doi.Org/10.1080/00207543.2022.2118892. https://doi.org/10.1080/00207543.2022.2118892
Jafari, N., Azarian, M., & Yu, H. (2022). Moving from Industry 4.0 to Industry 5.0: What Are the Implications for Smart Logistics? In Logistics (Vol. 6, Issue 2). https://doi.org/10.3390/logistics6020026
Karwowski, W. (2006). The Discipline of Ergonomics and Human Factors. In Handbook of Human Factors and Ergonomics (pp. 1-31). https://doi.org/10.1002/0470048204.ch1
Kawakami, T., & Kogi, K. (2005). Ergonomics support for local initiative in improving safety and health at work: International Labour Organization experiences in industrially developing countries. Ergonomics, 48(5), 581-590. https://doi.org/10.1080/00140130400029290
Kroemer Elbert, K. E., Kroemer, H. B., & Kroemer Hoffman, A. D. (2018). Ergonomics: How to Design for Ease and Efficiency. In Ergonomics: How to Design for Ease and Efficiency. https://doi.org/10.1016/B978-0-12-813296-8.00016-5
Laudante, E., Greco, A., Caterino, M., & Fera, M. (2020). Human-Robot Interaction for Improving Fuselage Assembly Tasks: A Case Study. Applied Sciences 2020, Vol. 10, Page 5757, 10(17), 5757. https://doi.org/10.3390/app10175757
Leng, J., Sha, W., Wang, B., Zheng, P., Zhuang, C., Liu, Q., Wuest, T., Mourtzis, D., & Wang, L. (2022). Industry 5.0: Prospect and retrospect. Journal of Manufacturing Systems, 65, 279-295. https://doi.org/10.1016/j.jmsy.2022.09.017
Leng, J., Zhu, X., Huang, Z., Xu, K., Liu, Z., Liu, Q., & Chen, X. (2023). ManuChain II: Blockchained Smart Contract System as the Digital Twin of Decentralized Autonomous Manufacturing Toward Resilience in Industry 5.0. IEEE Transactions on Systems, Man, and Cybernetics: Systems, 53(8), 4715-4728. https://doi.org/10.1109/TSMC.2023.3257172
Lu, Y., Zheng, H., Chand, S., Xia, W., Liu, Z., Xu, X., Wang, L., Qin, Z., & Bao, J. (2022). Outlook on human-centric manufacturing towards Industry 5.0. Journal of Manufacturing Systems, 62, 612-627. https://doi.org/10.1016/j.jmsy.2022.02.001
Maddikunta, P. K. R., Pham, Q. V., B, P., Deepa, N., Dev, K., Gadekallu, T. R., Ruby, R., & Liyanage, M. (2022). Industry 5.0: A survey on enabling technologies and potential applications. In Journal of Industrial Information Integration (Vol. 26, p. 100257). Elsevier. https://doi.org/10.1016/j.jii.2021.100257
Marjanovic, O. (2013). Improving data-driven decision making through human-centered knowledge sharing. Proceedings of the 24th Australasian Conference on Information Systems. https://aisel.aisnet.org/acis2013/125/
Olsen, E. C. B. (2007). Evaluation of Human Work (3rd ed.) Edited by John R. Wilson & Nigel Corlett 2005, 1048 pages, $64.95 Boca Raton, FL: Taylor & Francis Group ISBN 0415267579. Ergonomics in Design: The Quarterly of Human Factors Applications, 15(2), 31-31. https://doi.org/10.1177/106480460701500211
Pouyakian, M. (2022). Cybergonomics: Proposing and justification of a new name for the ergonomics of Industry 4.0 technologies. Frontiers in Public Health, 10, 1012985. https://doi.org/10.3389/fpubh.2022.1012985
Qutubuddin, HEBBAL, S. S., & KUMAR, A. C. S. (2014). ERGONOMIC EVALUATION OF LOW COST ADJUSTABLE WORKSTATION FOR ASSEMBLY OPERATION. International Journal of Mechanical and Industrial Engineering, 4(2), 84-89. https://doi.org/10.47893/ijmie.2014.1190
Radjiyev, A., Qiu, H., Xiong, S., & Nam, K. H. (2015). Ergonomics and sustainable development in the past two decades (1992-2011): Research trends and how ergonomics can contribute to sustainable development. Applied Ergonomics, 46(Part A), 67-75. https://doi.org/10.1016/j.apergo.2014.07.006
Rajendran, A., Kebria, P. M., Mohajer, N., Khosravi, A., & Nahavandi, S. (2022). A Home for Principal Component Analysis (PCA) as part of a Multi-Agent Safety System (MASS) for Human-Robot Collaboration (HRC) within the Industry 5.0 Enterprise Architecture (EA). Conference Proceedings - IEEE International Conference on Systems, Man and Cybernetics, 2022-Octob, 2569-2574. https://doi.org/10.1109/SMC53654.2022.9945535
Rawan, M. R. M., Daril, M. A. M., Wahab, M. I. A., Subari, K., Manan, Q., & Parveen, S. (2022). The Evolution of Ergonomics Risk Assessment Method to Prevent Work-Related Musculoskeletal Disorders (WMSDS). International Journal of Online and Biomedical Engineering, 18(8), 87-97. https://doi.org/10.3991/ijoe.v18i08.31313
Rupal, B. S., Rafique, S., Singla, A., Singla, E., Isaksson, M., & Virk, G. S. (2017). Lower-limb exoskeletons: Research trends and regulatory guidelines in medical and non-medical applications. In International Journal of Advanced Robotic Systems (Vol. 14, Issue 6). SAGE Publications Inc. https://doi.org/10.1177/1729881417743554
Siemens (2024). Process Simulate. Available at: https://www.dex.siemens.com/plm/tecnomatix/process-simulate-human [Retrieved: May 6, 2024].
Şucan, I. A., Moll, M., & Kavraki, L. (2012). The open motion planning library. IEEE Robotics and Automation Magazine, 19(4), 72-82. https://doi.org/10.1109/MRA.2012.2205651
Sukapto, P., Octavia, J. R., Pundarikasutra, P. A. D., Ariningsih, P. K., & Susanto, S. (2019). Improving occupational health and safety and in the home-based footwear industry through implementation of ILO-PATRIS, NOSACQ-50 and participatory ergonomics: A case study. International Journal of Technology, 10(5), 908-917. https://doi.org/10.14716/ijtech.v10i5.3033
Swinton, P. A., Cooper, K., & Hancock, E. (2017). Workplace interventions to improve sitting posture: A systematic review. In Preventive Medicine (Vol. 101, pp. 204-212). Academic Press. https://doi.org/10.1016/j.ypmed.2017.06.023
Thoben, K. D., Wiesner, S. A., & Wuest, T. (2017). "Industrie 4.0" and smart manufacturing-a review of research issues and application examples. In International Journal of Automation Technology (Vol. 11, Issue 1, pp. 4-16). Fuji Technology Press Ltd. https://doi.org/10.20965/ijat.2017.p0004
Wang, J., Han, S. H., & Li, X. (2021). 3D fuzzy ergonomic analysis for rapid workplace design and modification in construction. Automation in Construction, 123, 103521. https://doi.org/10.1016/j.autcon.2020.103521
Welfare, K. S., Hallowell, M. R., Shah, J. A., & Riek, L. D. (2019). Consider the Human Work Experience When Integrating Robotics in the Workplace. ACM/IEEE International Conference on Human-Robot Interaction, 2019-March, 75-84. https://doi.org/10.1109/HRI.2019.8673139
Xu, X., Lu, Y., Vogel-Heuser, B., & Wang, L. (2021). Industry 4.0 and Industry 5.0-Inception, conception and perception. Journal of Manufacturing Systems, 61, 530-535. https://doi.org/10.1016/j.jmsy.2021.10.006
Zizic, M. C., Mladineo, M., Gjeldum, N., & Celent, L. (2022). From Industry 4.0 towards Industry 5.0: A Review and Analysis of Paradigm Shift for the People, Organization and Technology. Energies 2022, Vol. 15, Page 5221, 15(14), 5221. https://doi.org/10.3390/en15145221
